30
Oct 23
0

The Top 10 Advantages of CO2 Laser Resurfacing and Cost in India

Tags : CO2 laser resurfacing cost in India CO2 Laser Treatment CO2 Treatment

Keeping the skin looking young, healthy, and fresh is something that we all desire. Most people start the skincare journey with the use of OTC cosmetic products which are generally not too heavy on the pocket, easy to use, and safe on the skin. They do show some results and work mildly on superficial skin issues but are not usually beneficial in the long term. The skin changes faster than you think and often the surface products become ineffective.

Sometimes, with skin issues such as dullness, dryness, and blotchiness nothing seems to work, not even the creams and tutorials that you spend hours on. You might think of cosmetic surgery to fight the issues but the cost and process involved may hold you back. There has to be some other option, right? A magical fairy-like skin rejuvenation treatment that can zap away all the skin woes the answer lies in CO2 laser skin resurfacing.

What Is Co2 Laser Skin Resurfacing?

As the name suggests, this treatment harnesses the powers of CO2 lasers for skin rejuvenation. This is a part of cosmetic treatment procedures and the most sought-after for a good number of reasons. CO2 laser skin resurfacing can target and treat many of the skin issues including lines and wrinkles, scars, warts, and other skin flaws.

Lasers are essentially narrow-spectrum light beams. The CO2 laser is an infrared laser with a wavelength of 10600 nanometres. The source of this beam of light is carbon dioxide. The main reason this type of laser is popular in skin treatments is because this particular wavelength is selectively and highly absorbed by water molecules.

How Does This Help The Skin And What Is Skin Resurfacing?

Skin resurfacing is a cosmetic procedure aimed at improving the texture, tone, and appearance of the skin. It’s used to address various skin concerns and imperfections, such as wrinkles, fine lines, scars, pigmentation irregularities, and uneven skin texture. The primary goal of skin resurfacing is to promote skin rejuvenation, resulting in a smoother, more youthful, and radiant complexion. Chemical peels, microdermabrasion, lasers, micro-needling, etc are all part of the resurfacing procedures.

When the CO2 laser hits the skin, it heats up the top layer of the skin and the water molecules in the epidermis vaporize and so do the epidermal cells. In this process, the top layer of the skin is stripped off without damaging the tissues. There are two types of CO2 lasers used, fractional and non-fractional lasers. Fractional CO2 lasers are also known as the gold standard for skin rejuvenation as they use thin columns of light to address the problem area, thus creating micro-injuries on the skin instead of continuous area damage. This technique reduces damage to the skin because of the heat and also minimizes the side effects making recovery faster.

CO2 laser skin resurfacing has many advantages over other skin rejuvenation treatments and these include-

Superior cosmetic results make you feel better about your skin
This gold-standard treatment gives even faster results. This means not only you do get to see physically better skin; but the results also give a boost to your self-esteem, give added confidence, and improve your comfort level even with little or no makeup. CO2 laser skin resurfacing gives the skin an internal glow that is hard to miss.
You look younger
Removing the epidermis takes away the imperfections from the skin such as rough areas, pigmentation, superficial scars, blemishes, etc, and even tightens the skin. The CO2 laser beam on the skin burns the collagen strands and the collagenous tissue contracts. When this happens, the immune system perceives it as an injury and triggers the natural repair mechanism of the body into action. As the skin heals, fresh epidural cells grow back and collagen production improves, and even the deep skin layers undergo repair and renewal thus tightening and firming the skin and giving it a younger appearance. The quality of your skin will appear decades back in time.
It’s a chemical-free process
The CO2 laser skin resurfacing works on the skin and there are no chemicals used, hence there are none or minimal chances of new breakouts or rashes which other products can cause.
CO2 lasers zap away the signs of aging:
One of the biggest reasons for the popularity of CO2 lasers in skin resurfacing is that this treatment can remove the signs of aging. It can successfully treat fine and coarse wrinkles, especially from sensitive areas such as around the eyes, nose, mouth, and forehead. In addition to this, the improved collagen product helps keep the wrinkles at bay.
Sun damage reversal:
CO2 laser skin resurfacing is highly recommended by top dermatologists for the treatment of moderate to severely sun-damaged skin. Sun damage causes depigmentation, skin discoloration, spider veins, and loss of elasticity on the skin. Overexposure to the sun can cause sunspots, age spots, and uneven skin tone. CO2 laser treatments target and eliminate these pigmentation irregularities, revealing a more even and youthful complexion.
Scar revision:
Both superficial and deep acne scars can be treated with the help of CO2 laser skin resurfacing. Whether you have surgical scars, scars from injuries, chicken pox scars, or stretch marks, CO2 laser resurfacing can help minimize their appearance. The laser promotes skin regeneration, gradually fading scars over time
Skin texture improvement
CO2 laser skin resurfacing treatment is an effective way to remove the melasma and brown spots from the skin, reduce the pore size, and correct the uneven skin. The result is an even textured, smooth, and rested-looking skin.
It Is An Excellent Alternative Treatment For Skin Growth Treatments:
non-melanoma skin cancers, and benign skin growth like actinic keratosis, warts, and moles can also be removed using the CO2 laser skin resurfacing treatments, especially in cases when facial plastic surgery is contraindicatory.
The Treatment Is Precise
CO2 laser skin resurfacing uses laser beams that can be precisely targeted on the problem areas without damaging the surrounding skin which makes it perfect for treating delicate facial skin.
It Is Safe For Most Skin Types
Laser can be easily used on most skin types without any side effects. The results are long term and with little skin care and sun protection, you can prevent most of the issues from coming back. Lasers can be used for older skin and younger skin as well.

CO2 laser resurfacing is a versatile and highly effective cosmetic procedure with a multitude of benefits. Whether you’re looking to reduce wrinkles, diminish scars, reverse sun damage, or improve overall skin texture and tone, CO2 laser resurfacing can help you achieve your skincare goals. However, it’s crucial to consult with a qualified dermatologist or skincare specialist to determine if CO2 laser resurfacing is suitable for your specific needs and skin type. With the right guidance, you can enjoy the transformative advantages of this advanced cosmetic treatment.

The cost of CO2 laser skin resurfacing in India can vary widely depending on several factors, including the type of laser used, the area being treated, the location of the clinic or hospital, the experience of the doctor, and the number of sessions required

Fractional CO2 Laser Resurfacing

This is one of the most common types of laser skin resurfacing. The cost can range from ₹5,000 to ₹25,000 per session, depending on the extent of the treatment area and the clinic’s location. Keep in mind that these are approximate cost ranges, and the actual cost can vary from one provider to another. Additionally, you may require multiple sessions for optimal results, so it’s essential to discuss the full treatment plan and pricing with a qualified best dermatologist in India or a cosmetic surgeon. The location of the clinic can also influence costs, with major cities typically having higher prices than smaller towns or rural areas. It’s crucial to choose a reputable and experienced provider to ensure both safety and effectiveness when undergoing laser skin resurfacing.

20
Sep 23
0

CO2 Laser Treatment: Is it the Ultimate Solution for Ageing Skin

CO2 Laser Treatment Cost in India: Is it the Ultimate Solution for Ageing Skin

Tags : CO2 laser resurfacing cost in India cost of CO2 laser treatment fractional CO2 lasers

CO2 Laser Treatment: Is it the Ultimate Solution for Ageing Skin

Anti-aging is one of the most talked about topics around the world of skin care for years and years. Fine lines, wrinkles and sagging skin are the most common concerns among men and women of today. Ageing, pollution, gravity and our lifestyles (including diet, hydration and the exercises we do) often take a toll on the skin which can sometimes cause damage that may seem irreparable. But worry not, CO2 laser treatments are the superheroes to the rescue for all the skin worries.

How does CO2 laser treatments work?

The revolutionary CO2 lasers treatments utilize the light wavelength of 10600 nanometre (mid-infrared spectrum). This wavelength of light is primarily attracted to water. Since our skin is 65% water, when this laser light falls on it, it creates heat and micro and controlled injuries under the skin. this results in skin tightening and promotes quick skin healing resulting in rejuvenated skin. this tool is a great option for reversing the signs of effects of ageing and sun exposure.

For the CO2 laser resurfacing cost in India, the benefits for skin are too many. CO2 (carbon dioxide) lasers are commonly used in dermatology and cosmetic procedures by top cosmetic surgeons, plastic surgeons and dermatologist to address various signs of aging easily. These lasers work by emitting a concentrated beam of light that vaporizes or removes the outer layers of skin, promoting collagen production and skin tightening. CO2 lasers are popular because of their versatility and can be used in resurfacing, excision and incisional treatments. Some common skin issues that CO2 lasers can effectively treat include:

Wrinkles and Fine Lines: because the skin starts to make more collage and cell turnover increasers the fine lines and wrinkles reduce as the skin tighten up after CO2 lasers treatments.
Sun Damage and Brown Spots: CO2 lasers can target and reduce the appearance of sunspots, age spots, and other pigmentation irregularities caused by sun exposure over the years by exfoliating the top layers of the skin.
Uneven Skin Texture: The laser’s ability to resurface the skin and improving cell turnover can lead to an improvement in the texture of the skin, making it smoother and more even.
Acne Scars: CO2 lasers can help minimize the appearance of acne scars by removing the damaged outer layers of skin and promoting the growth of new, smoother skin.
Skin Laxity: The heat from CO2 lasers stimulates collagen production, which can result in tighter and more youthful-looking skin, reducing sagging and laxity.
Skin Tone and Discoloration: CO2 lasers can help improve overall skin tone by addressing issues such as redness, blotchiness, and uneven pigmentation.
Large Pores: CO2 lasers can reduce the appearance of large pores by resurfacing and exfoliating the skin and promoting collagen and elastin remodelling.
Stretch Marks: While complete removal of stretch marks is difficult, CO2 laser treatments can help fade their appearance by encouraging collagen production and improving skin texture.
Skin Rejuvenation: CO2 lasers provide an overall rejuvenation to the skin by promoting a more youthful appearance, improving radiance, and enhancing skin quality.
Mole and Wart removal: The lasers can cut the wart and destroy the virus causing warts
Scars such as burn scars, keloid and hypertrophic scars,
Birthmarks: lasers are used to break up the birthmarks and even out the skin.

Is co2 laser treatment cost in India worth it?

The success rate of Laser Skin resurfacing using CO2 lasers are more than 85% which is considerably higher than any other long term treatment methods. CO2 laser treatments are considered more aggressive and may require more downtime compared to some other treatments. Recovery can involve redness, swelling, and peeling of the treated skin. Additionally, individuals with certain skin types or conditions, such as darker skin tones, may need to exercise caution when considering CO2 laser treatments due to the risk of pigmentation changes or scarring. As with any medical procedure, it’s essential to consult with a qualified dermatologist or medical professional before undergoing CO2 laser treatment to determine if it’s appropriate for your individual needs and skin type.

The results of lasers take some time to appear and are often subtle and gradual. Therefore, you will need to have some patience and avoid sun exposure during the recovery time. When considering co2 laser resurfacing cost in India, one must be aware of the benefits of CO2 laser treatments such as

Higher precision
Lower cost than plastic surgery and face lift
Versatility
Minimally invasive
Lower downtimes
Tissue selectivity
Ease of administration i.e., lasers can be done as an outpatient procedure and do not need an elaborate setup.

Factors affecting the CO2 laser treatment price in India

Before you finalize getting a treatment understanding the price aspect of it is very important. CO2 laser skin treatments are cosmetic procedures and hence not covered by insurance. Hera are some important things to consider

1. Location where you will get the laser skin treatment

The cost of the treatment in Major cities where the cost of living is high is more than the places where the cost of living is moderate. If you are looking for an affordable service then look for expert providers that have excellent patient reviews albeit no to luxury offices. Smaller cities and suburban areas offer lower prices for CO2 laser treatment as they are competing to draw in the patients.

2. The credentials and expertise of the cosmetic surgeon or dermatologist

As we have mentioned earlier, CO2 laser treatment is an aggressive and intense cosmetic treatment. In correctly used it can cause darkening of skin, more pigmentation and even burns and scarring. Hence you need a board certified dermatologist or plastic surgeon or cosmetic surgeon with great expertise and years of experience using lasers. Therefore, the key to having the best results from the laser treatment is to not go for the cheapest but rather pay for experience.

3. Type of CO2 laser used

The term CO2 laser just denotes the specific wavelength of the laser. It is also further classified into ablative, non-ablative, fractional and non-fractional lasers. Different brands have different types of lasers and therefore ask your dermatologists about which one will suit your skin concern the best. All types of lasers use carbon dioxide as a medium to generate the laser beam but they differ in terms of how they deliver energy to the skin during the procedure.

Non-Fractional (Traditional) CO2 Lasers:

Non-fractional CO2 lasers are also known as fully ablative lasers. These lasers deliver a continuous beam of laser energy to the entire surface of the skin being treated. The energy is absorbed by the skin, causing controlled damage to the outer layers. This process removes the damaged skin cells and promotes collagen production in the deeper layers of the skin. Non-fractional CO2 lasers are effective for treating severe signs of aging and significant skin concerns like deep wrinkles, pronounced sun damage, and certain types of scars.

However, the recovery time for non-fractional CO2 laser treatments is usually longer compared to fractional lasers. Patients may experience significant redness, swelling, and require several weeks for complete healing.

Fractional CO2 Lasers:

Fractional CO2 lasers, on the other hand, deliver the laser energy in a fractionated pattern, meaning that the laser beam is divided into numerous microscopic beams or columns. These columns of laser energy create small, controlled zones of damage in the skin, leaving areas of untouched skin in between. This approach stimulates the skin’s natural healing process and encourages the production of new collagen and healthy skin cells. Fractional CO2 lasers are effective for treating a variety of skin concerns because of their precision with less downtime compared to non-fractional lasers.

1. The size of the treatment area

Generally, laser treatments target the entire face or the body but if the patient desires they can be used to just target the small areas. For example, if you are just concerned about the forehead lines then the practitioner can target that or if you are feeling conscious about pigmentation on your hands then they can be treated. Selected treatment reduces the co2 laser treatment price in India and makes it more affordable. Larger treatment areas take more time, have more downtime and also amp up the cost of CO2 laser treatment in India.

2. How many sessions of CO2 laser treatment will you need?

The treatment time varies with the skin type and the severity of the issue. Most people will need a series of treatments in case of fractional lasers and this will affect the cost of CO2 laser treatments in India. In case of ablative lasers usually one treatment is enough to show the desired results hence the laser resurfacing cost in India is calculated accordingly. Most clinics offer package pricing for the series of treatment and sometimes you can get good deals on those too.

Treatment procedure for CO2 laser skin resurfacing program

The procedure for CO2 skin laser resurfacing treatment is actually quite simple:

The area to be treated is cleaned
A local anaesthesia is applied
The patient is given eye shield to wear to protect against laser beams
The laser is moved on the skin for treatment
The total process takes about 30-45 mins to complete
The practitioner will clean the area and apply a soothing and antibiotic cream on the area.
The patient is given sunscreen to apply on the treatment area

The patient can go home the same day post treatment and resume normal daily activities.

CO2 laser treatment price in India varies with many factors and hence it is important that you get the individual pricing for your concern before starting the treatment.

14
Jul 23
0

How to Prepare Skin Before and After CO2 Laser Treatment

The fractional CO2 laser treatment in India is the gold standard for cosmetic skin treatments. This technique is safe for the skin, does not damage the skin cells and nor does it require any kind of hospital stays. One treatment of carbon dioxide (CO2) laser can be used to improve the appearance of various skin concerns, including wrinkles, scars, uneven skin tone, and texture irregularities successfully.

With proper after care, the fractional CO2 laser treatment has long lasting results. Hence the top cosmetic surgeons advocate proper before and after care for the CO2 laser treatments for the best results. Here is how a typical fractional CO2 laser procedure performed:

Consultation: Prior to the procedure, you will have a consultation with a dermatologist or cosmetic surgeon. They will evaluate your skin condition, discuss your concerns and goals, and determine if you are a suitable candidate for fractional CO2 laser treatment.

Preparation: On the day of the procedure, your skin will be cleansed and a topical numbing cream may be applied to minimize any discomfort during the treatment. Eye protection will be provided to shield your eyes from the laser light.

Laser treatment: You will be made to sit back comfortably. The procedure begins with the application of the fractional CO2 laser device to the targeted areas of your skin. The laser emits controlled beams of energy that create tiny, evenly spaced microthermal zones on the skin’s surface. These help the surgeon target the problem areas and leave the rest of the skin untouched. These zones are surrounded by unaffected tissue, which promotes faster healing and minimizes downtime post the treatment. As the laser energy is delivered to your skin, you may experience a warm or heat sensation, which can vary depending on the intensity of the laser settings and the area being treated. The topical numbing cream helps to minimize any potential discomfort.

Adjustments and customization: The laser settings, such as the energy level, density, and pattern of the laser beams, can be adjusted based on your specific skin concerns and treatment goals as discussed with the dermatologist during consultation. This customization allows for precise targeting of different skin concerns and varying skin types.

Post-treatment care: After the fractional CO2 laser treatment, a soothing ointment or dressing may be applied to the treated areas to protect and moisturize the skin. You will be given specific post-treatment instructions, which may include using gentle cleansers, applying moisturizers, and avoiding direct sun exposure and you need to follow them.

Recovery and results: Following the procedure, you can expect some redness, swelling, and a mild burning or sunburn-like sensation in the treated areas. The post care recovery instructions will help you minimize these without skin damage. The recovery time can vary depending on the intensity of the treatment, but it typically ranges from a few days to a couple of weeks. During this time, the skin will naturally shed the old, damaged layers, and new, healthier skin will emerge. Results become noticeable as the skin heals, with improvements in texture, tone, and the reduction of wrinkles and scars.

It is important to consult a qualified and experienced dermatologist or cosmetic surgeon for fractional CO2 laser treatment who can asses your specific needs and provided advice and customize the treatment accordingly. The whole treatment procedure takes less than one hour to complete and you can go home the same day.

Why is it necessary to pay great attention to pre and post treatment care?

Preparing the skin before CO2 laser treatments is important to ensure optimal results and minimize potential risks or complications. Here are some reasons why skin preparation is necessary:

Enhanced Treatment Efficacy: Preparing the skin before the CO2 laser treatment helps to improve the effectiveness of the procedure. Cleansing the skin helps remove any dirt, oil, or debris on the surface, allowing the laser energy to penetrate the skin more efficiently. This enhances the delivery of laser energy to the targeted areas, leading to better results in terms of skin resurfacing, collagen stimulation, and improvement of various skin concerns.
Reduced Risk of Infection: Skin preparation involves cleansing the treatment area, which helps reduce the presence of bacteria and minimize the risk of infection during and after the procedure. This is especially important since the fractional CO2 laser creates microscopic channels in the skin, temporarily compromising its barrier function. By preparing the skin, the risk of bacterial contamination and subsequent infections is significantly reduced.
Minimized Discomfort: Skin preparation may involve the application of a topical numbing cream or gel to the treatment area. This helps to minimize any potential discomfort or pain during the CO2 laser treatment. Numbing the skin before the procedure can enhance your comfort and make the experience more tolerable.
Improved Safety: Skin preparation is an essential step in ensuring the safety of the CO2 laser treatment. It allows the healthcare professional to assess the skin condition, identify any potential contraindications or risks, and determine the appropriate settings for the laser treatment. Preparing the skin and following proper protocols helps minimize the chances of adverse effects or complications during the procedure.
Optimal Recovery: Preparing the skin before CO2 laser treatments can contribute to a smoother and faster recovery process. Gentle cleansing and moisturizing the skin prior to the procedure can help maintain its hydration and integrity, promoting better healing. Following the recommended skincare routine and post-treatment care instructions can further support the recovery process and maximize the long-term results.

Prepare the skin before CO2 laser treatments

The specific steps to pre and post care for fractional CO2 laser treatments may vary depending on the clinic, the doctor and the laser device used but the basics remain the same. The pre-preparation for the treatment is a as important as the post recovery care. This is because the laser works on the skin and the layers under it if not done correctly it can only aggravate the skin condition and other risks.

Preparing the skin

Avoid any kinds of heavy sun exposure. This also means staying away from tanning lamps, beds, saloons etc for four weeks before the treatment. Use a broad spectrum sunscreen regularly and avoid going out during peak sun hours.
Medications which cause sun sensitivity should be avoided from three days before the treatment
If you are suffering from skin conditions such as cold sores or herpes or shingles in the area that is to be treated then the cosmetic surgeon will give you anti-viral medication to take two days before the treatment.
Stop using any anti-ageing treatments or skin exfoliating products such as glycolic acid from one month before the treatment. This will prevent uneven results post the CO2 laser procedure.
Ask your dermatologist about options for anti-inflammatory drugs.
Waxing, scrubbing, rubbing the area or opting for microdermabrasion treatment is also not advised about 30 days before the procedure.
Remember to eat and drink well before the CO2 laser treatment to prevent skin dehydration.

Post fractional CO2 laser treatment skin care

Self-care after fractional CO2 laser treatment is very important. The fractional CO2 laser skin treatment is used for many skin issues and it removes the outer layer of the skin. to give time for the skin to heal requires extra attention and hence the longer recover time for the fractional laser. Post the treatment session your skin might feel tighter, red, flaky and peeling. The sensitive skin might last for up to two weeks. You might also notice some grid marks on the skin because of the fractional laser but it will subsidize in 5-7 days. If you miss on skin care during the recovery time then it can cause hyperpigmentation. Also, a good healing time makes the healing faster and maximizes the effects. Here is what to do

Immediately post treatment you will be given the ice pack to cover the treated area. This will reduce the immediate swelling and give you relief from the tinging sensations.
Do not wash your face for the first 24 hours after the treatment as the skin is till raw and it is not advisable to get water on the wounds.
The practitioner will give you some Vaseline or an antibacterial cream to cover the area along with a bandage.
If there are any prescribed medications then continue to take them till the stipulated time.
Avoid showering immediately after the treatment and no baths till the cosmetic surgeon says healing is complete.
You can continue using the ice pace for 10-15 mins 1-5 times a day as needed.
Use vinegar and water mix to wash the treated area gently. You can use a gentle soap and water once a while. The cleaning and washing should be done with distilled water only. If there is too much oozing then you can wash your face for up to 3-4 times a day.
Don’t apply any cream, gel or lotion over the skin that your practitioner has not given you.
Don’t try and remove the bandages unless the practitioner has instructed you to do so.
To avoid crusting on the skin keep it moist and hydrated. Following CO2 laser treatment, you need to keep the skin from becoming too dry.
Till the time the healing is complete do not indulge in activities that might cause you to sweat a lot. This includes steam and sauna treatments and tanning.
Alcohol and swimming will delay the healing process and hence stay away from them.
There might be a temptation to use makeup to cover the peeling skin but for a week or two after the treatment avoid the artificial colours and chemicals of makeup. If your cosmetic surgeon okays it then maybe use can use a light BB cream three to four days after the treatment is over.
Exfoliation and scrubbing the face is also a no-no for two weeks after the treatment. This means you need to be careful with the use of AHAs, BHAs etc on the skin.
Don’t wax or shave over the treatment areas.
For the first 10 days post the treatments dry your face using paper towels gently.
Keep your hair tied back to reduce the risk of infection
Sleep upright for about 7-10 days post treatment to reduce the facial swelling
Avoid close contacts with pets and animal and fibres and keep the environment around you clean to prevent skin infection.
When the oozing and crusting is over, you can start using sunscreen of minimum SPF 40 or more along with a gentle cleanser and moisturizer. Sun avoidance is a good idea for six weeks post treatment.

Pink skin is the sign of healing skin and according to the experts, the longer the pinkness lasts the better is the collagen formation. But when it is accompanied by excessive oozing or crusting then it is a sign of excessive scrubbing or an irritant being applied on the skin.

Do not go for waxing, microdermabrasion, exfoliation and chemical peel treatments for three months from the day of the treatment.
Mineral makeup is the best choice post fractional CO2 laser treatment in Mumbai.

Call the cosmetic surgeon if you have

A lasting fever higher than normal
Feel chills and shaking even when it is hot
Have a green or yellow discharge from the treated skin
Pain and discomfort that does not go away even with painkillers
Redness and swelling on the treated area even after 7-10 days post treatment
Bleeding from the skin

CO2 laser treatment cost in India

The cost of CO2 laser treatment in India can vary depending on several factors, including the location of the clinic, the reputation and expertise of the clinic or cosmetic surgeon, the extent of treatment required, and the specific areas being targeted for treatment, the number of sessions needed. The laser treatment cost can also vary depending on whether it is a full-face treatment or a treatment targeting specific areas.

On average, the cost of CO2 laser treatment in India can range from ₹10,000 to ₹50,000 per session. However, it’s important to note that this is an approximate range, and the actual cost may differ based on individual circumstances and the specific clinic you choose.

It is advisable to consult with a reputable dermatologist or cosmetic surgeon in your area to get an accurate assessment of the cost for your desired treatment as the CO2 laser treatment cost in India is not covered by insurance.

Additionally, it’s essential to consider factors beyond cost alone, such as the experience and qualifications of the healthcare professional, the reputation of the clinic, and the quality of care provided. Choosing a skilled professional and a reputable clinic is crucial to ensure both safety and satisfactory results.

02
Jun 23
0

The Pros and Cons of Fractional CO2 Laser Treatment for Wrinkles and Fine Lines

Tags : CO2 Laser Treatment The Pros and Cons of Fractional Wrinkles and Fine Lines

The Pros and Cons of Fractional CO2 Laser Treatment for Wrinkles and Fine Lines

Fractional CO2 laser skin resurfacing treatments are the gold standard for skin treatments for the Indian skin. The temperature in Indian subcontinent are on the warmer side all through the year and the sun shines brightly. The skin gets exposed to the harmful sun rays and leads to many problems such as dry skin, early onset of wrinkles, skin weathering, fine lines etc. These are the issues that one normal faces with old age but exposure so sun can bring them forward before their time. The result is that you start looking tired and old and the skin loses its natural lustre.

Fractional laser skin treatments are the simple and quickest way to see long lasting results in wrinkles and fine line treatments. While other ablative and non-ablative lasers are good for the skin, they do not give the same precise results as a fractional CO2 laser. This is a new-age treatment for the skin which can treat a range of skin problems without damaging the skin. The pros of fractional CO2 laser treatments far outweigh the cons of the treatments.

Who can get a laser CO2 treatment

People who have an otherwise healthy skin but facing with problems such as facial wrinkles, age spots and fine lines
Adults with saggy skin, acne scars, facial scars and blemishes etc.
People looking to correct uneven skin tone and pigmentation
Patients seeking treatment for skin tan or damage because of UV rays

How does this treatment work?

Lasers are essential beams of light that can reach under the skin and help heal various skin issues. They do not use any chemical on or in the skin or sand or abrade the layers of the skin. Lasers target the dermis under the skin and cause the collagen to regenerate and tighten the elastin fibres to give the smoother and brighter look to the skin on surface with fewer lines and wrinkles. There are no incisions made in the treatment or need for stiches.

The fractional CO2 laser targets the deeper skin tissue layers and gently ablates it in a fractioned manner i.e., it works on the columns of the problem areas of the skin and does not affect the other parts of skin. The light rays heat up the skin creating tiny heat channels under the skin which in turn triggers the body’s natural healing response and activate natural collagen production for faster tissue healing.

Apart from anti-aging treatments such as wrinkles, fine lines and pigmentation, lasers can also treat

Rosacea
Uneven skin tone and texture
Dull skin
Sun damage and age spots
Hyperpigmentation
Acne and other scars such as surgical and accidental
Skin laxity
Reduce stretch marks
Reduce the appearance of prominent spider veins
Tighten skin pores
Remove unwanted hair from the body including underarms and pubic area.

And it is not just the face, laser treatments can also be safely used on face, neck, chest, hands etc.

How is Fractional CO2 laser treatment done?

The skin is prepared by cleaning the dirt, oil and bacterial from it and sanitizing it. do not wear makeup on the day of the treatment.
Then the doctor will apply a local or topical anaesthetics to the area which will help make you comfortable during the procedure.
The dermatologist will mark the treatment areas and use the targeted CO2 laser beams to repair the wrinkles, lines and other skin damages.
The skin is then wrapped to protect it and heal it properly.
You can go home and about your normal activities the same day.

Pros of Fractional CO2 skin resurfacing treatment

This type of laser skin treatments can reduce your skin trouble such as wrinkling by almost half. It is an excellent treatment giving dramatic changes even in deep wrinkle and fine lines. The overall improvement in skin texture is sure to earn you many compliments for your age defying looks. Here are some advantages of opting for this procedure for skin treatment

Its side effect is skin tightening. Which is actually a hidden benefit of the procedure. The results continue to improve for about a year after the treatment.
It has a much shorter recovery time then other skin resurfacing procedures such as chemical peels and microdermabrasion. There is no pain during the procedure.
It takes only just 60-90 minutes per session and results continue to improve over the year
Results are visible in just one treatment
Fractional CO2 laser can be combined with other treatments for the skin such as use of injectables and surgical cosmetic procedures.
Higher patient satisfaction ration because Fractional CO2 laser treatments can be used on all skin types and in all age groups.
Less pain and shorter recovery time (just a couple of weeks)
Better long-term results than other treatments. Fractional CO2 laser promotes natural healing of the skin. Therefore, it not only gives immediate skin correction results but also the results keep improving over the next one year.
Creates more youthful appearance. The older you are the difficult it is to recover from the surgical skin correction procedures. Fractional CO2 lasers give faster and better results without the usual drawbacks of a surgical procedure.

Cons of fractional CO2 laser treatments

Laser treatments as anti-ageing option is a cosmetic treatment and it goes without saying that you need to take good care of your skin post the treatment. If you don’t then the fractional laser might not give the results that you are seeking

For up to two weeks, you might have tender skin and require cleaning of the skin and application of ointment to prevent scabbing and bring down the redness and inflammation.
If you are not using proper sun protection then the skin might become more pink or red
Sometimes fractional CO2 laser skin resurfacing can cause pigmentation to the areas that are not treated.
You might notice more acne or an exacerbated condition because of the creams and bandages.
Touching the healing area increases the risk of infection. In some cases, the treatment can aggravate or reactive the herpes and cause cold sores.
Skin might become lighter or darker after the treatment
In rare events scaring might happen
It will take about 3 weeks to see the full results
Pre and post treatment protocols need to be followed seriously
Fractional CO2 laser treatment cost in India is a little on the costly side

The very fact the fractional CO2 laser treatments promote the skin to heal itself is quite incredible. It is an efficient way to get dramatic changes in your skin in just one session. All you need to be aware of is the downtime and discomfort and be prepared to handle it as the doctor suggested. It is not a rush treatment. For some this treatment might not even work, for example

People who are prone to sun damage or cannot avoid sun
Patients who are prone to pigmentation
Patients who have a tendency to get hypertrophic scars and keloid scars
People suffering from vitiligo, psoriasis etc.
Patients undergoing radiation and chemotherapy

The cost of fractional CO2 laser treatment in India can vary depending on factors such as the location, the reputation and experience of the clinic, and the extent of the treatment required.

On average, the fractional CO2 laser treatment cost in India can range from Rs. 8,000 to Rs. 20,000 per session. However, the cost may be higher or lower depending on the factors mentioned above.

It is important to note that the cost of fractional CO2 laser treatment should not be the only factor to consider when choosing a clinic or doctor. It is also important to consider the qualifications and experience of the doctor, the reputation of the clinic, the technology used, and the after-care services provided.

02
Apr 23
0

How long does it take to heal after CO2 laser treatment?

Tags : CO2 Laser CO2 Laser Treatment CO2 Treatment Face treatment Laser treatment skin treatment

CO2 laser skin rejuvenation treatments are the gold standard for treating most of your skin woes. From improving skin tone to lightening scars and reducing fine lines and wrinkles to improving skin texture, CO2 laser treatment can do it all without causing any damage to the skin. It can also treat warts, moles, and other stubborn skin-based issues such as age spots and blemishes. As opposed to the standard ablative treatments, co2 fractional laser cost in india have lower and customizable downtime, fewer risks, and give dramatic results.

This modern skin rejuvenation treatment focuses on the problem areas of the skin and delivers high levels of energy in very short pulses. This removes the layers of the skin but does not heat or cause head damage to the surrounding areas of the skin. The effects can be seen almost immediately.

What can CO2 laser treatment do?

It can treat many skin issues, such as

Acne, chickenpox, or trauma scars
Uneven skin pigmentation
Birthmarks and tattoos
Sun damage or photoaging
Age spots or liver spots
Non-responsive skin after a facelift
Fine lines and wrinkles on face and neck
Enlarged oil glands on the nose
Lose and dull skin

The laser stimulates collagen and elastin production under the skin and tightens the skin over time. You can see the effects and improvement even after the treatment is long over. However, if you have active acne, dark skin, deep wrinkles, or excessively sagging skin, CO2 laser treatment might not work well for you.

Healing after CO2 laser treatments

Lasers have very low downtime, but you still need to give the skin some time to heal and return to its younger and fresher self. Redness, swelling, etc., are some common side effects of laser treatment. This is because of the dynamic nature of the treatment. The results also vary from person to person, so the question of when you can see the results is much easier to ask than to answer.

The healing time depends on the severity of the issue, the profile of the patient, and how well they follow the strictness of aftercare routines. Remember, rushed results equate to wrong results. Your skin will take time to heal, and you must let it at its own pace. Here are some simple guidelines to help you aid skin healing.

Once the treatment is over, the practitioner will give you an ice pack to put on the treated area for 15 minutes. This will bring down the light-burning sensation and reduce the swelling. Then you will be given a list of instructions to follow and what to expect during the healing process. Remember to take the cream, bandage, and petroleum jelly for the treated area before you leave the clinic. Here is a simplified list of what to expect during the healing process for CO2 laser treatment in India

You can take a light shower once you get home but avoid soaks and baths until the healing season is complete.
Use the cold compress regularly over the first 24 to 48 hours for 15 minutes every 1-2 hours.
Apply a thin layer of a good occlusive moisturizer or antibiotic ointment twice a day to protect the skin while it heals.
If you have any facial treatment appointments or make-up schedules, then cancel them till four weeks post-completion of the treatment.
Don’t smoke. Smoking only delays and damages the healing process and adds to the signs of aging.
Sleep on an extra pillow so that the head is in an elevated position and swelling reduces.

Day 1-2 post CO2 laser treatment, you will experience some burning sensation, and there might be some swelling too. Stinging and itching are also this is normal, and they will go down in 24-48 hours. Keep using the ice pad every few hours and rest at home. This is the time when the old collagen and elastin fibers break down, and the skin clears the tissue debris.

Day 2-4 after the procedure: You will not need to use the ice pack so much now. The swelling will go down, and the skin will start to heal and might feel a bit tight. There can be some crust formation on the treated year, and sometimes a yellow serum-like fluid might ooze out. This is normal and shows that fresh skin has started to form under it, and everything is on time. Resisting the urge to pick and scratch the skin at it can delay the healing and even cause scarring and infection.

Day 4-10: These are the most important days of your recovery. The swelling and inflammation will be down, and you need to be sick to the advice of your practitioner and use the recommended products. Your will heal sooner by doing this, and you will be able to get back to your usual skincare routines. For the healing period, your routine should include

Washing your face with the recommended cleanser and letting your skin air dry.
Apply the cream to your skin and keep topping up when the skin feels dry and tight. Do this minimum of twice a day.
Wash your wash again before going to bed and moisturize. Don’t rub the moisturizer on the skin; apply it lightly.
If possible, use distilled water for the face and avoid using groundwater.
If the practitioner has asked to keep the treated area covered by a bandage, then change the dressing regularly after washing the area.

The skin will feel itchy, but at the end of 10 days, the skin will have healed, and the crusting will be minimal. You will be able to see the new pink skin, which will come to its normal color in the following weeks.

Week 2-3 after CO2 laser procedure on skin: The healing of outer skin starts, deeper healing starts, collagen formation begins, and tissues heal—about 14 days post-procedure, skin strengthening starts, which continues for years. Let natural health continue. Avoid using saunas, swimming pools, and hot tubs; don’t shave on the treated area. You still need to avoid make-up and the sun. And if you have to go out, wear sunscreen of SPF 50 or above and use a hat to protect the skin.

Anytime during the initial healing times, if you feel any of the following, call your practitioner immediately.

High fever
Unnatural discharge from the treated area
Pain and discomfort have increased and are not helped by pain medication.
Increased redness or swelling on or around the treated area
Bleeding on the treated area

You will continue to see improvements in your skin. Keep being gentle on the skin. The skin texture and appearance will see a visibly dramatic change after three months of the treatment. It might take up to a year to see the full effects. The sagging skin will not be visible, and the lines and wrinkles will have reduced evidently. You will be able to get back to your routine. Exercise regularly and eat skin-friendly foods such as green leafy vegetables, bright fruits, nuts, seeds, omega three rich foods, and water. A good routine will make sure that the enhancements of CO2 laser skin resurfacing last for a long time and give your skin the natural smoothness and glow that you always desire.

CO2 laser treatment cost in Mumbai

The cost of CO2 laser treatment in Mumbai is influenced by several factors, such as the location of the clinic, the experience of the doctor, and the extent of the treatment required. It also depends on your skin type and the number of sessions required. It’s important to note that most patients require multiple sessions to achieve optimal results. The number of sessions required can vary depending on the severity of the skin condition being treated.

Before undergoing CO2 laser treatment, you must schedule a consultation with a qualified, experienced and famous dermatologist in india
or plastic surgeon. During the consultation, the doctor can evaluate your skin condition, discuss the treatment options available, and provide an accurate estimate of the cost of the procedure. They can also advise you on any potential treatment risks or side effects.

Category Archives: Co2 Laser Treatment

Oct 23

What Is Co2 Laser Skin Resurfacing?

How Does This Help The Skin And What Is Skin Resurfacing?

Superior cosmetic results make you feel better about your skin

You look younger

It’s a chemical-free process

CO2 lasers zap away the signs of aging:

Sun damage reversal:

Scar revision:

Skin texture improvement

It Is An Excellent Alternative Treatment For Skin Growth Treatments:

The Treatment Is Precise

It Is Safe For Most Skin Types

Fractional CO2 Laser Resurfacing

Sep 23

CO2 Laser Treatment: Is it the Ultimate Solution for Ageing Skin

How does CO2 laser treatments work?

Is co2 laser treatment cost in India worth it?

Factors affecting the CO2 laser treatment price in India

1. Location where you will get the laser skin treatment

2. The credentials and expertise of the cosmetic surgeon or dermatologist

3. Type of CO2 laser used

Non-Fractional (Traditional) CO2 Lasers:

Fractional CO2 Lasers:

1. The size of the treatment area

2. How many sessions of CO2 laser treatment will you need?

Treatment procedure for CO2 laser skin resurfacing program

Jul 23

Jun 23

The Pros and Cons of Fractional CO2 Laser Treatment for Wrinkles and Fine Lines

Who can get a laser CO2 treatment

How does this treatment work?

How is Fractional CO2 laser treatment done?

Pros of Fractional CO2 skin resurfacing treatment

Cons of fractional CO2 laser treatments

Apr 23

What can CO2 laser treatment do?

Healing after CO2 laser treatments

CO2 laser treatment cost in Mumbai

About Dr. Rinky Kapoor

Expertise In

Find Us on Facebook

About Cosmetic Dermatologist India

Skin care, for all diseases

Recent Post

Our Clinics